Chopped ceramic fiber bulk

Chopped ceramic fiber bulk are manufactured from high purity raw materials: alumina powder, silica sand for the high temperature grades and zircon sand is also used. The ceramic mixture is heated in an electric furnace ...

Chopped ceramic fiber bulk are manufactured from high purity raw materials: alumina powder, silica sand for the high temperature grades and zircon sand is also used. The ceramic mixture is heated in an electric furnace to temperatures in excess of 2000deg and the stream of molten material is drawn into fibers by either spinning or blowing.

NR ceramic fiber bulk are loose, long and flexible with high refractory properties, and are produced by “blown” and “spun” processes. Ceramic fiber bulk and chopped fiber show a high temperature stability and an outstanding chemical stability is complemented by their resistance to oxidation and reduction. NR ceramic fiber bulk and chopped fibers are available in a variety of length. They are used as the base for the production of blanket, moldable, and vacuum formed board and shaped products.

The chopped ceramic fiber bulk products have a widely used in high temperature industry. Such as Textile manufacture, Chimney fill, Expansion joint packing ,Wet process feedstock ,Filtration media ,Kiln car infill , Ladle insulation

General Useful Infomation :
Temperature Grade : 1260 C-1430C -1500C
Standard Packing :    20 kgs/ box
Delivery Time:  usually within 14 days.

Features

Low heat storage and thermal conductivity

Excellent chemical and thermal stability

Contains no bonding agent and corrosive substance

Thermal shock resistance and acoustic absorption

Asbestos free and flexible applications

 

Typical Applications

    STEEL INDUSTRY

  • Heat Treating and Annealing Furnaces
  • Furnace Door Linings and Seals
  • Soaking Pit Convers and Seals
  • Furnace Hot Face Repairs
  • Reheat Furnaces
  • Ladle Covers
    POWER GENERATION

  • Boiler Insulation
  • Boiler Doors
  • Reusable Turbine Covers
  • Pipe Covering

 

    OTHER APPLICATIONS

  • Insulation of Commercial Dryers and Covers
  • Veneer Over Existing Refractory
  • Stress Relieving Furnaces
  • Glass Furnace Crown Insulation
  • Fire Protection

Typical Parameters

Description

STD BULK

HP BULK

TEXTILE BULK

CHOPPED BULK

Chemical Composition (%)

Al2O3

≥44

≥45

≥45

≥45

SiO2

≥52

≥54

≥54

≥54

Fe2O3

≤1

≤0.5

≤0.5

≤0.5

TiO2

Na2O

≤1

≤0.2

≤0.2

≤0.2

ZrO2

 –

 –

 –

Physical Properties

Classification Temperature(℃)

1260

1260

1260

1260

Shot Content (%)

≤15

≤15

≤15

≤15

Melting Point(℃)

1425

1575

1575

1575

 

The data shown are average results of tests under standard procedures and are subject to variation. Results should not be used for specification purposes or creating any contractual obligation. For more information on the safety application or materials, please refer to the work practices and material safety data sheet.

Ceramic Fiber Insulation 

Unifrax Ceramic Fiber 

ThermalCeramics High Temperature Fiber